|
Updated March 2,
7:45AM
Check this page again on Sunday 8AM
GLIDE WAX RECOMMENDATION
|
Toko |
|
|||
|
DATE |
PLACE |
EVENT |
WAXING-MEETING PLACE |
|
|
Sunday 3/2/08 |
Anchorage |
Tour of Anchorage |
Service |
|
|
|
|
Snow |
Snow tape |
Humidity |
1-layerBase wax |
2-layer |
High Fluor |
|
Skis # |
Grind-Structure |
Temperature |
|||||
|
#1 |
O.9 linear check with Jan at Service |
20-25F |
OLD |
<75 |
2 layers LF grey |
HF Grey/HF Red Mix 1:1 |
Toko-Highspeed Molly |
|
or |
0.9 crossed |
20-30F |
NEW |
+-75 |
System3 red |
HF red/yellow 2:1 Mix |
Toko jet Stream High
Speed |
|
#2 |
0.9 crossed |
20-30F |
OLD |
<75 |
2 layer LF grey |
HF Grey / HF red Mix 1:1 |
REX TK 72 |
Note:
- Before waxing please clean
up your skis with fibretex abrasive (in one direction) (white
non-abrasive- back and forward)
- Apply the first layer,
cool down 5 minutes and apply the second layer
- Cool down 5-15 minutes
in room’s temperature
- Scrape the wax from
skis
- Brush off the wax with
bronze or cooper brush (one direction)
- Finish brushing with
nylon brush (back and forward)
- Last step-Use
nonabrasive fibretex to polish your skis and ski edges.
KICK WAX
OLD Snow: Apply a thin
layer of base wax (green) and iron in + a thin layer Toko Klister Multiviola
cold dawn + hard wax 2-3 layers
New snow: Apply a thin layer of
base wax (green) and iron in + the 3-5 layers hard wax.
Good luck
JanB