| Before starting to glue the bottom, you need LEVEL and PARALLEL sawhorses that will not shift positions. Once everything was level and parallel, we fastened the legs of the sawhorses to the floor. |
 |
| Once the sawhorses are level, the boat is turned over for gluing. The hull is squared as seen on page 32 of the Manual. |
 |
| The whole bottom is glued between the wires as shown. |
 |
| Once all the seams are glued, the wires can be pulled in prepartion for the full fillet along each seam. |
 |
 |
 |
 |
 |